AT 5 white Open Ended Timing Belts Specifications 1. Good stability 2. Impact resistance 3.Good performance 4.Long service life. 5.great drawing ability Specification: Parameters: Nominal pitch: 5mm Steel wire polyurethane synchronous belts Trapezoidal-shaped teeth as per DIN 7721 T1 standard....
1. Good stability 2. Impact resistance 3.Good performance 4.Long service life. 5.great drawing ability
Nominal pitch: 5mm
Steel wire polyurethane synchronous belts
Trapezoidal-shaped teeth as per DIN 7721 T1 standard.
It is most applicable to high flexible drive application.
With comparably high axial and angular accuracy, it is widely used in linear drive and small power transmission.
Tolerance of the width :±0.5(mm)
Tolerance of the length:±0.5(mm/m)
Tolerance of the thickness:±0.2(mm)
Rated load of opening belts(N)
Maximum load of thermoweld belts (N)
Breaking load of opening belts(N)
1. Thermoplastic polyurethane timing belt from the opening material, with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.
2. Production tolerance of small, reliable transmission and has a dimensional stability. The production process or in the teeth and tooth add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane in the belt or the back of the red plastic to prevent corrosion or high load.
3. Open (PU) belt made by the themoplastic polyurethane material with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.
4. Production tolerance.Drive, reliable and dimensional stability. The production process in the tooth surface or teeth and add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane on the back of the belt to prevent corrosion or high load.
5. Open (PU) belt has the following properties: Mechanical properties-Dimensional stability-pre-tension low-low noise-highly resistant to wear -no maintenance-elastic good -highly accurate straight-straight line speed of up to 80m/sec and chemical properties aging, water solution, UV UVA, anti-acid and alkali corrosion with other thermoplastic materials combination.
6. Opening opening band finished with a continuous length, the middle and the sides parallel to the wire core. Standard roll length is 50 or 100 meters.
7. Open(PU) leather belt with a variety of different core option, such as kevlar core, highly flexible core(HF) high-perdormance (HP) and high performance and high toughness(HPF).
Founded in 2010, with over 40,000 square meters’ area, the headquarter of Jarulan Industrial Belt Co., Ltd. is set in Jiangxi Province, China. Jarulan owns 3 imported advanced production lines which can produce conveyor belt rolls with maximum width of 3.5m.Annual output of conveyor belts is up to 36 million square meters. Depending on the first-class technical strength and strong manufacturing capability, Jarulan is able to customize its main products, such as PVC polishing conveyor belt, PVC/PU/PE conveyor belt, transmission belt and high-precision timing belt, according to our customers’ special requirements. Not only in Fujian, Guangdong, Shandong, and other provinces of China, but also in Turkey, India, Middle East, South America and some European countries, Jarulan has built its complete selling and service network with the cooperation of dealers to provide customers with timely door-to-door service.