AT 5 White Open Ended Timing Belts

AT 5 White Open Ended Timing Belts
Product Details

banner.jpg


AT 5 white Open Ended Timing Belts


Specifications

1. Good stability 
2. Impact resistance 
3.Good performance 
4.Long service life. 
5.great drawing ability 

Specification:

Parameters:

Nominal pitch: 5mm

Steel wire polyurethane synchronous belts

Trapezoidal-shaped teeth as per DIN 7721 T1 standard.

It is most applicable to high flexible drive application.

With comparably high axial and angular accuracy, it is widely used in linear drive  and small power transmission.

 

Tolerance:

Tolerance of the width :±0.5(mm)

Tolerance of the length:±0.5(mm/m)

Tolerance of the thickness:±0.2(mm)

 

Technical parameters:

Width(mm)

10

16

25

32

50

75

100

Rated load of opening belts(N)

 

520

1080

1650

2230

3410

5120

6900

Maximum load of thermoweld belts (N)

 

260

540

825

1115

1705

2560

3450

Breaking load of  opening belts(N)

 

1870

3960

6090

7800

12390

17100

24310

Weight(kg/mm)

0.03

0.05

0.086

0.12

0.16

0.25

0.33

 

 

 

Material: PU

Detailed description:

1. Thermoplastic polyurethane timing belt from the opening material, with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.

2. Production tolerance of small, reliable transmission and has a dimensional stability. The production process or in the teeth and tooth add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane in the belt or the back of the red plastic to prevent corrosion or high load.

3. Open (PU) belt made by the themoplastic polyurethane material with high wear resistance. Ensure all types of wire core is still in the high-load transmission good running ability.

4. Production tolerance.Drive, reliable and dimensional stability. The production process in the tooth surface or teeth and add a layer of nylon to ensure that applications running in the special characteristics of the same. Also thicker layer of polyurethane on the back of the belt to prevent corrosion or high load.

5. Open (PU) belt has the following properties: Mechanical properties-Dimensional stability-pre-tension low-low noise-highly resistant to wear -no maintenance-elastic good -highly accurate straight-straight line speed of up to 80m/sec and chemical properties aging, water solution, UV UVA, anti-acid and alkali corrosion with other thermoplastic materials combination.

6. Opening opening band finished with a continuous length, the middle and the sides parallel to the wire core. Standard roll length is 50 or 100 meters.

7. Open(PU) leather belt with a variety of different core option, such as kevlar core, highly flexible core(HF) high-perdormance (HP) and high performance and high toughness(HPF). 


157t5.jpg


84at5.jpg

Founded in 2010, with over 40,000 square meters’ area, the headquarter of Jarulan Industrial Belt Co., Ltd. is set in Jiangxi Province, China. Jarulan owns 3 imported advanced production lines which can produce conveyor belt rolls with maximum width of 3.5m.Annual output of conveyor belts is up to 36 million square meters. Depending on the first-class technical strength and strong manufacturing capability, Jarulan is able to customize its main products, such as PVC polishing conveyor belt, PVC/PU/PE conveyor belt, transmission belt and high-precision timing belt, according to our customers’ special requirements. Not only in Fujian, Guangdong, Shandong, and other provinces of China, but also in Turkey, India, Middle East, South America and some European countries, Jarulan has built its complete selling and service network with the cooperation of dealers to provide customers with timely door-to-door service.

工厂图.jpg

If our at 5 white open ended timing belts caters to your requirement, welcome to buy the low price and quality belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.
Feedback