PVC Diamond Pattern Conveyor Belt

JARULAN,one of the leading belt manufacturers and suppliers in China, can customize special belts according to your application environment. Our belt can serve for a long time because of its heat resistace,chemical resistance and high strength.

Product Details

Diamond pattern conveyor belt features:

Not easy to age, oil, UV, acid resistant

Temperature range: For the object to be transported, the load temperature is -5 °C ~ +100 °C, and the short time is -15 °C ~ +110 °C

Accurate transmission, no slippage during operation, and constant transmission ratio;

Connection method: thermoplastic or cold glue bonding, or steel buckle joint, the minimum drum diameter must be increased by 50%.

Conveyor: flat or roller type. The minimum wheel diameter of forward rotation is 65mm, and the minimum wheel diameter is 130mm.

PVC conveyor belt has the advantages of high strength, light weight, wear resistance, colorful and beautiful, non-toxic and tasteless, antistatic, small stretching, long service life and low resistance.

No deformation, high wear resistance, maintenance free

Diamond pattern conveyor bel

Maintenance of the pattern conveyor belt

In the transportation and storage, the pattern conveyor belt should be kept clean and protected from direct sunlight or rain and snow to prevent contact with acids, alkalis, oils, organic solvents and other materials, and one meter away from the heating device.

The storage temperature should be kept between 18-40 °C during storage and the relative humidity should be kept between 50-80%.

During storage, the conveyor belt shall be placed in rolls and shall not be folded. It shall be turned once every season during the period of storage.

Conveyor belts of different types and sizes are not suitable for use together, and the joints are well glued.

The type, structure, specification and number of layers of the conveyor belt should be selected according to the conditions of use.


Common varieties

Due to the difference in the transport material and the difference in the conveying inclination, the shape and height of the pattern are required to be different. Commonly used varieties are: herringbone, figure eight, fish bone, U shape, cylindrical shape, pitting point and so on. Or according to the user's requirements, it is suitable for the pattern conveyor belt of powder, granular, and block materials with an inclination of less than 30 degrees.IMG_3282

The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight, rain and snow, and prevent contact with substances affecting rubber quality such as acid, alkali, oil, organic solvent, etc., and 1 meter away from the heating device. 2. The temperature in the warehouse should be kept between -15 °C and +40 °C during storage, and the relative humidity should be kept between 50-80%. 3. The conveyor belt must be placed in a roll during storage, and should not be folded. It should be turned once every season during the placement. 4. The running speed of the conveyor belt should not be more than 5.0 m / s. The transportation block should be large, the material with large wear and the fixed plough type unloading device should be used at low speed. When the specified speed is exceeded, the tape life will be affected. 5. The relationship between the diameter of the transmission drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission drum to the drum and the requirements of the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor. 6. In order to reduce the impact and wear of the material on the tape, the feeding direction should be in the running direction of the tape; the drop of the material falling onto the tape should be minimized; the feeding port should avoid the roller or the roller directly above; The section should shorten the idler spacing and take buffering measures. In order to prevent the tape from being scratched, the contact part of the scraper cleaning device and the unloading device and the tape should be made of a rubber plate of appropriate hardness. Do not use a tape head with a cloth layer.


Founded in 2010, with over 40,000 square meters’ area, the headquarter of Jarulan Industrial Belt Co., Ltd. is set in Jiangxi Province, China. Jarulan owns 3 imported advanced production lines which can produce conveyor belt rolls with maximum width of 3.5m.Annual output of conveyor belts is up to 36 million square meters.

If our pvc diamond pattern conveyor belt caters to your requirement, Welcome to buy high quality low price conveyor belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.

Hot Tags: pvc diamond pattern conveyor belt, China, factory, manufacturers, low price, price

You Might Also Like