Low Hardness Non Slip Flexible Conveyor Belt With H Saw-tooth Profile

Jarulan "H" saw-toothed pattern series PVC conveyor belt is suitable to apply in steep conveyors. Its high density gives more friction to the belt than normal saw-toothed type.

Product Details

Low Hardness Non Slip Flexible Conveyor Belt with H Saw-Tooth Profile

H saw-toothed belt

There are different type of saw-toothed pattern.

-one-way saw-toothed (standard/narrow pattern)

-Two-way saw-toothed(reverse)

Our high density H series saw-toothed PVC conveyor belt is produced with low hardness, which is just 45 shore A to 55 shore A. The softer teeth could help to avoid the damage of products surface during conveying.

It is specific for marble and ceramic polishing machines whenever a high coefficient of friction is required.

Also, it is widely used in transportation of agriculture products like rice bags where high friction and soft contact surface is needed.

Please find below technical data sheet of our H series saw-toothe pvc conveyor belt:

Total thickness: 9.0mm/8.64mm

Force at 1% elongation: 12N/mm

Top sideFabricBottom side
material: PVCply: 2material: antisatic fabric
color: petrol blue (PG)weft: rigid (flexible is available)color: bare
thickness: 6.6mm

surface: one-way stagerred saw tooth (H)

conveying belt sawtooth


There are different thickness of saw-toothed pattern pvc conveyor belts available. Please contact us for more details.

contact jarulan for conveyor belts


If our low hardness non slip flexible conveyor belt with h saw-tooth profile caters to your requirement, Welcome to buy high quality low price conveyor belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.
Hot Tags: low hardness non slip flexible conveyor belt with h saw-tooth profile, China, factory, manufacturers, low price, price
Inquiry

You Might Also Like