Home > News > Content

PU Conveyor Belt Wear Resistance And Excellent Tensile Properties

May 15, 2017

With the food industry enterprises produced by the different areas of production and production requirements in the use of equipment and equipment research and development and expansion, making the production enterprises of the production environment is also different, so the food belt PU Conveyor Belt accessories on the design of each the same.

In order to be able to better adapt to the production environment, and some can adapt to high temperature environment, and some strong anti-wear ability, choose what kind of belt PU Conveyor Belt parts, to determine what work conditions can be one of the elements of production operations The

Repair the thickness of the coating controllable, green pu PU Conveyor Belt belt, forming fast, put a short time. The cured coating has a very high cohesive strength, tensile strength, peel strength and good hardness, toughness, elongation. Can greatly simplify the repair construction process, good self-leveling, green pu PU Conveyor Belt belt manufacturers, the appearance of light. Both can quickly repair the damaged rubber PU Conveyor Belt belt, rubber products, but also in the surface of the product pre-coated with a layer of protective layer to extend the service life.

In the use of the PU Conveyor Belt belt, the most common problems are: foreign body scratches, local foreign body damage, wear, perforation and so on.

    Usually the PU Conveyor Belt belt due to foreign body caused by local damage, in accordance with the traditional method to all the demolition, the repair and heating vulcanization or scrap replacement.

    Can be used polymer rubber repair materials, it has a strong adhesion, excellent wear resistance and excellent tensile properties. The use of polymer rubber repair materials, free disassembly, heat-free vulcanization site repair rubber PU Conveyor Belt belt scratches, repair costs are low, short time, to avoid scrap replacement and long downtime caused by significant losses, and the repair of the PU Conveyor Belt belt can reach the new transmission Of the service life.

    Repair the thickness of the coating controllable, forming fast, short duration of use. The cured coating has a very high cohesive strength, tensile strength, peel strength and good hardness, toughness, elongation. Can greatly simplify the repair construction process, good self-leveling, the appearance of light. Both can quickly repair the damaged rubber PU Conveyor Belt belt, rubber products, but also in the surface of the product pre-coated with a layer of protective layer to extend the service life.

PU Conveyor Belt belts should be kept in use and preserved to avoid direct sunlight or rain and snow leaching, to prevent contact with acids, alkalis, oils, organic solvents and other materials, and one meter away from the heating device. Storage temperature should be kept between 18-40 ℃, relative humidity should be maintained at between 50 - 80 ℃. During the storage period, the PU Conveyor Belt belt shall be placed in rolls and shall not be folded. Different types, specifications of the number of PU Conveyor Belt belt should not be used together, the joint is best to use glue method. PU Conveyor Belt belt type, structure, specifications, layers should be based on the use of reasonable selection. PU Conveyor Belt belt operating speed should not be greater than 2.5 m / s. Large block, large wear materials and the use of fixed discharge device should be used as low speed. The transmission roller diameter of the PU Conveyor Belt and the relationship between the PU Conveyor Belt belt, the drive roller, the matching of the drum and the requirements of the roller groove angle should be selected according to the design of the PU Conveyor Belt. The direction of the feeding should be in the direction of the PU Conveyor Belt belt, in order to reduce the impact of the PU Conveyor Belt belt on the PU Conveyor Belt belt should be chipped, reducing the material falling distance, PU Conveyor Belt belt should be shortened the distance between the roller and the use of buffer roller With the use of soft and moderate barrier board, so as not to file board too hard, scratch the PU Conveyor Belt belt with the surface.