(1) accurate transmission, no sliding at work and constant transmission ratio;
(2) stable transmission, with buffering, vibration damping capacity and low noise;
(3) the transmission efficiency is high, which can reach 0.98, and the energy saving effect is obvious;
(4) convenient maintenance, no lubrication, low maintenance cost;
(5) the speed ratio is large, which can reach 10, and the linear velocity can reach 50 meters per second, which has a large power transmission range, which can reach several watts to several hundred kilowatts;
(6) it can be used for long-distance transmission, and the center distance can reach above 10m.
(7) compared with v-belt transmission, the pretension is smaller, and the load on the shaft and bearing is small;
Open Ended PU Timing Belt
The finished products is infinite, in the middle of belt, paralleled with two sides is steel cord. Currently, we can process with PU belt with 50mm width and infinite long. Generally, it is to be installed in straight mobile transmission appliance
Jointed Endless Timing Belt
Jointed Endless Timing Belt was processed from open end belt according to thermoplastic character; it can be at any length. A number of V interfaces design made the interface section can support stronger pull. Jointed belt is applied to transmission, especially, under rated power; we can produce various function belts and the belt of different teeth, furthermore, even attaching different baffle and cover.
1. Polyurethane Open Ended Timing belt----infinite long or joined endless type.
2. Strengthen cord is stainless steel, and Kevlar for your reference.
3. Adding green fabric on tooth for all sizes
4. All sizes can be jointed into endless belt.