The deviation of heat-resistant conveyor belts should be corrected in time. Heat-resistant conveyor belts of different types and specifications should not be used together. The joints should preferably be glued. The types, structures, specifications, and layers of heat-resistant conveyor belts should be selected according to the conditions of use. The speed of the heat-resistant conveyor belt is generally not to be greater than 2.5 m/s. Large-block, large-abrasion materials and unloading devices using fixed pears should be used as low as possible. When the conveyor is in use, if there is a lack of idler, it should be added and repaired in time; the idler is covered by the material, resulting in poor rotation, preventing leakage of material stuck between the roller and the tape, paying attention to the lubrication of the active part of the heat-resistant conveyor belt. However, the heat-resistant conveyor belt must not be greased.
In the use and maintenance of heat-resistant conveyor belts, care should be taken not to be exposed to direct sunlight or rain and snow, to prevent the contact of acids and alkalis with the objects; heat-resistant conveyors should be placed in a roll during storage, and it is best not to fold. It is advisable to open and turn every month; the heat-resistant conveyor belt should be kept as low as possible during use; the feed direction of the heat-resistant conveyor belt must conform to the running direction of the conveyor belt; and the heat-resistant conveyor belt should be deflected. Should be promptly addressed and rectified; heat-resistant conveyor belts should be avoided during operation to be torn by the collision of the conveyor parts, and this should be paid special attention.