Home > News > Content

Conveyor Belt Selection And Use

Sep 28, 2017

Conveyor belt in the course of the use of elongation, part of which is elastic elongation, in the external force can be restored after the original state, the other part of the preparation of the skeleton material shrinkage, this part can not be restored. Commonly used fabric conveyor belt, EP conveyor belt elongation is relatively small, and NN conveyor belt elongation is relatively large, and in the course of use, NN conveyor belt due to nylon fiber force after the creep is relatively large, so the use of the process Conveyor Belt

The elongation ratio is increased, and because of the creep of the fiber, the amount that can be retracted after the external force is removed is much smaller than the elongation.Conveyor Belt

Conveyor belts in the transport and storage, should be kept clean to avoid direct sunlight or rain and snow leaching, to prevent acid, alkali, oil, organic solvents and other substances in contact, and one meter away from the heating device. Conveyor Belt Conveyor belt storage warehouse temperature should be maintained between 18-40 ℃, relative humidity should be maintained at between 50-80%. Different types, specifications of the number of conveyor belt should not be used together, the joint is best to use glue method. Conveyor belt type, structure, specifications, layers should be based on the use of reasonable selection.

The direction of feeding should be the direction of operation of the conveyor belt, in order to reduce the impact of the conveyor belt should be adopted to reduce the gap between the conveyor belt, should reduce the distance between the roller and the use of buffer roller Material, conveyor belt conform to the use of soft and moderate baffle plate, so as not to file board too hard, scratch the conveyor belt with the surface.Conveyor Belt 

The direction of feeding should be the direction of operation of the conveyor belt, in order to reduce the impact of the conveyor belt should be adopted to reduce the gap between the conveyor belt, should reduce the distance between the roller and the use of buffer roller Material, conveyor belt conform to the use of soft and moderate baffle plate, so as not to file board too hard, scratch the conveyor belt with the surface.Conveyor Belt