Home > News > Content

Conveyor Belt How To Choice?

May 15, 2017

Conveyor belts are divided into many specifications and models based on the use of environment and requirements:

1. Conveyor Belt According to the size of the volume by width is divided into: B500 B600 B650 B800 B1000 B1200 B1400 and other common models (b represents the width, units in millimeters). At present, the company's largest production capacity for the B2200mm conveyor belt.

2. Conveyor Belt According to the use of the different environment, divided into ordinary rubber conveyor belt, heat-resistant rubber conveyor belt, cold rubber conveyor belt, acid-resistant rubber conveyor belt, oil rubber conveyor belt, food conveyor belt and other models. The common rubber conveyor belt and food conveyor belt covering the lowest thickness of 3.Conveyor Belt 0mm, the lowest covering plastic is 1.5mm; heat-resistant rubber conveyor belt, cold-resistant rubber conveyor belt, acid-resistant rubber conveyor belt, oil rubber conveyor belt covering the lowest thickness of 4.5mm, covering the lowest plastic for 2.0mm. Depending on the circumstances of the use of the specific 1.5mm thickness can increase the use of the upper and lower covering plastic life.

3. Conveyor Belt According to the conveyor belt cloth tensile strength divided into ordinary canvas conveyor belt, strong canvas conveyor belt. The powerful canvas conveyor belt is divided into nylon conveyor belt (NN conveyor belt) and polyester conveyor belt (ep conveyor belt).

Conveyor Belt I Jizhong company in the use of customers in reference to some foreign experience developed, a variety of pattern conveyor belts and baffle conveyor belts, the following specific introduction:

Conveyor Belt Pattern Conveyor Belt Introduction:

The pattern conveyor belt is composed of the belt body and the pattern part, because the transporting material is different and the conveyor inclination angle size, requires the pattern shape and the high-low (depth) also differ. The common varieties of pattern conveyor belts are as follows:

Conveyor Belt Herringbone pattern

Characteristics: With the surface of the "people" with higher than the band pattern, but also closed, each pattern can be divided into high, medium and low three kinds.

Use: Suitable for ≤ 40 degrees of dip in powdery, granular, small pieces of material conveying, can also transport bagged materials.

Stripe pattern

Conveyor Belt Characteristics: With a high-band horizontal stripe pattern, the pattern is divided into high, medium, low three kinds, each pattern according to arrange spacing can be divided into sparse, dense and other forms.

Use: Applicable to the level of ≤ 30 degrees dip in the conveying of packaging materials. In the case of a trough, can replace the herringbone pattern.

Granular pattern

Conveyor Belt Characteristics: With a high-out belt or concave embedded with the body of the granular pattern, can also be made into square holes or ribs and cloth pattern shape.

Use: convex granular pattern is suitable for soft packaging materials or need to have the focus of the material conveying (such as cardboard boxes) or non-slip conveyor.

Concave-pit granular pattern is suitable for the conveying of granular material with a 45 degree inclination.