1 Conveyor belt should be kept clean during transportation and storage, avoid direct sunlight, rain and snow immersion, and prevent contact with substances affecting rubber quality such as acid, alkali, oil, organic solvent, etc., and 1 meter away from the heating device.
2 The temperature in the warehouse should be kept between -15 °C and +40 °C during storage, and the relative humidity should be kept between 50-80%. The conveyor belt must be rolled into a roll during storage, and should not be folded. The placement time should be turned once every season.
3 The running speed of the conveyor belt should not be more than 0.5 m per second. The transportation block should be large, the material with high wear and the low-speed should be used when using the fixed pear type unloading device. Exceeding the tape's specified speed will affect the life of the tape.
4 The relationship between the diameter of the transmission roller of the conveyor and the belt layer of the conveyor belt, the matching of the transmission roller and the reversing drum and the requirement of the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.