Factory Conveyor Belt

In order to reduce the impact and wear of the material on the tape, the feed direction should be in the direction of the tape; the drop of the material falling into the sand pocket should be reduced as much as possible; the feed port should avoid the positive of the roller or the idler Above;...

Product Details

201708031624174623245.jpgv-guide-pvc-feed-belts-with-sealed-edge201708031626067316429.jpg微信截图_20180626155335.png201708031503052256063.jpg201708031506448863151.jpg201708031507116582264.jpg

In order to reduce the impact and wear of the material on the tape, the feed direction should be in the direction of the tape; the drop of the material falling into the sand pocket should be reduced as much as possible; the feed port should avoid the positive of the roller or the idler Above; the tape receiving section should shorten the idler spacing and take buffering measures.


The relationship between the diameter of the drive roller of the conveyor belt conveyor and the belt layer of the conveyor belt, the matching of the transmission roller and the reversing drum and the requirements for the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.


If our factory conveyor belt caters to your requirement, welcome to buy the low price and quality belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.
Inquiry